Tryton TUV12B, Operating Instruction

Page: 5 / 52

5
Using the charger:
a) Use only dedicated power adapters to charge the battery.
Application of a power adapter dedicated to charge another type of the
battery unit poses a risk of fires.
b) The supplied charger should only be used for charging
batteries that are supplied together with it.
Charging other
batteries may cause breaking and disintegration of the battery, bodily
harm, or fire.
c) Do not disassemble the charger.
d) The charger is designed exclusively for indoor use. It must not
be exposed to water or moisture.
e) Charge only in an ambient temperature between 15-25
degrees.
f) Do not insert metal objects of any kind into the charger.
Fig.A 1. Keyless chuck
2. Clutch control knob
The device is dedicated to drive in and out screws, drilling boreholes in 3 . Rotation direction switch
such materials as steel, wood, plastics, etc. The combo drill and
4 . Drilling level/plumb indicator (level vial)
screwdriver is designed exclusively for DIY applications .
5 . Handle
6 . Strap for hanging on hand
7 . Battery
8 . Battery lock clip
9 . Magnet
1 0 . On/off switch
1 1 . Auxiliary lighting
- Burns when changing drill bits (Drill bits heat up intensely during
operation; use protective gloves when changing the drill bit).
- Throwing back machined object or its fragment.
- Bending/breaking the drill.
DEVICE COMPONENTS
APPLICATIONS AND CONSTRUCTION:
Despite using the tool according to its intended application it is
impossible to eliminate certain residual risk factors. Considering the tool
construction the following risks may occur when operating the tool:
- Touching the rotating drill bit with the hand
operator's clothes .
ź
- 1 piece
ź
- 2 piece s
ź
- 1 piece
ź
User's manual - 1 piece
ź
Warranty card - 1 piece
The numbering of device components refers to graphics presented on page
2 of the user's manual:
The tool must not be used for work requiring a professional tool.
Any use of the that is not in observance with the above-
mentioned purpose is forbidden, leads to the loss of warranty, and
relieves the manufacturer from responsibility for the resulting damage.
Any modifications of the tool by the user relieve the manufacturer from
responsibility for any damage and injuries to the user and the
surroundings.
or
THE SET CONTAINS:
Cordless drill/s crewdriver
Battery
:
device
Fig.C
Fig.F
Fig.G
Charger
12. Charger
13. Clutch setting indicator
14. Drilling setting pictogram
15. Left-threaded fixing screw
MODEL
Rotation speed under no-load conditions
Supply voltage
TUV12B TUV14B TUV18B
Chuck clamping range
Rechargeable battery
Rated voltage
Electric capacity
Charging time
Battery weight
B attery charger
Mains voltage
Output current
14,4 V 18 V 12 V
0-550 rpm
0,8- 10 mm
14,4 V 18 V 12 V
1 h
1,5 Ah
230 V-240 V, 50 Hz, 45 W
Acoustic pressure level (LpA)
Acoustic power (LwA)
Vibration level according to: EN 60745-2-1/A11:07
a
h,D
2
0,969 m/s
(t olerance of measurements : K=1,5 m/s²)
84,5 dB(A)
95,5 dB(A)
TECHNICAL PARAMETERS
Ni-Cd
0,41 kg 0,49 kg 0,61 kg
7,2-24 V DC; 1,3 A
Maximum torque 14 Nm 18 Nm 12 Nm
Maximum drilling
diameter
Wood
Steel
1 5 mm
5 mm
1 6 mm
6 mm
18 mm
7 mm
Weight (with battery) 1,35 kg 1,43 kg 1,55 kg
0-550 rpm 0-550 rpm
0,8- 10 mm 0,8- 10 mm
T olerance of measurements : KpA/KwA
84,5 dB(A)
95,5 dB(A) 84,5 dB(A)
95,5 dB(A)
3 dB(A) 3 dB(A) 3 dB(A)
2
0,969 m/s
2
0,969 m/s
1 h
1,5 Ah
1 h
1,5 Ah
( Drilling into metal ) ( Drilling into metal ) ( Drilling into metal )