Tryton THL2000B, Instruction Manual

Page: 7 / 56

7
e) The power cord should be placed and bear in mind the safety of other
behind the tool at all times during
persons staying at your workplace.
operation.
c) Danger of burns! Never touch the
nozzle when hot. Always wear f) Do not point the hot air stream at the
protective gloves. power cord and do not touch the
power cord with the nozzle when hot.
d) Do not look into the nozzle when the
It may result in damage to its insulation and
tool is on.
electric shock.
e) Always wear safety goggles when
g) Do not carry or hang the tool on its
operating the tool.
power cord.
f) Do not use the tool as a hair dryer! The
h) Do not use a power tool with its power
hot air emitted by the hot air gun exceeds the
cord damaged. Do not touch the temperature of air provided by a hair dryer.
power cord when damaged; if the
Working instructions and use tips:
damage to power cord occurs during
a) Protect the hot air gun against
operation, unplug the cord from the
impacts and surface damage caused
mains socket. Damaged power cords
by sharp objects.
increase the risk of electric shock.
b ) Before you use the tool always check
WARNING!
air inlet and outlet for any obstacles
If the undetachable power cord
restricting a free air flow.
is damaged, it should be replaced either
c ) Do not burn the paint as it may result
by the manufac turer or by an
in fire. Keep the paint away from the nozzle,
authorized service center or a qualified
as it can ignite after some period.
electrician to avoid any risks.
d ) Do not obstruct either air inlets or
Personal safety :
nozzle outlet as it can result in
a) When processing plastics, paints,
excessive temperature and damage
varnishes and other materials,
to the tool. Do not keep the hot air outlet
flammable and toxic gases are closer than 5 cm from the surface processed.
generated. Do not use the tool near
e ) Do not put the nozzle on any object
flammable materials and explosive
during and directly after operation.
gases.
Do not place the tool on its side.
Whenever you wish
b) To provide protection against vapors
and fumes wear a special mask
protecting against dusts and vapors
emitted by lead-containing paints
to put the hot air gun
aside, set it in a vertical position.
f ) When you stop using the tool, during
b r e a k s o r c a r r y i n g o u t a n y