Tryton THL2000B, Instruction Manual

Page: 6 / 56

6
k) Store power tools in a dry, dust and
water-protected place.
l) Carry your power tool in its original
packaging to provide protection
against mechanical damage.
WARNING! General warnings
regarding the use of power
tools.
Repair :
a) Do not use the device when it rains or
under high humidity conditions. It
may result in injuries or death caused by
electric shock.
b) When operating the hot air gun
outdoors always use a residual
WA R N I N G ! H O T A I R G U N ,
current device (RCD). The use of RCD
additional safety instructions –
reduces the risk of electric shock.
Workplace safety:
c) Before each use check the tool, its
power cord and plug for any damage.
If any damage is found, stop working
and have the tool repaired sending it
to a service center (the address
provided in the warranty card).
Using a
defected device can be dangerous to health
and life. Never open its housing as the tool
does not contain any user serviceable parts.
d) Do not put any objects into the nozzle.
It may result in damage to the tool and
electric shock.
–do not use the tool in explosive
environments;
– be aware that heat can be transferred to
combustible materials located beyond your
field of vision;
– always place the tool on its base after use
m) Keep handles and grip surfaces clean
and free from oil and grease. Secure and allow to cool down before storing;
grip and control over the tool in unexpected
– never leave your tool unattended when it
circumstances are impossible if handles and
is on.
grip surfaces are slippery.
c) Do not point the nozzle with hot air at
other persons, animals and towards
the places where flammable
materials are stored.
Electrical safety:
a) Always work in a well ventilated area.
Gases, vapors and fumes generated during
operation are frequently dangerous to
human health.
b) If handled carelessly, the tool can
cause fire, therefore:
– be extremely careful when using the tool
in places where combustible materials are
stored;
– do not keep the hot air stream aimed at the
same place for a longer period;
a) Warranty and post-warranty repairs
of its power tools are carried out by
PROFIX Service, which guarantees the
best quality or repair and use of
genuine spare parts.