Tryton TCV14L2, Operating Instruction

Page: 5 / 52

5
b) The supplied charger should only be used for charging
batteries that are supplied together with it.
Charging other
batteries may cause breaking and disintegration of the battery, bodily
harm, or fire.
n
The set contains:
c) Do not disassemble the charger.
d) The charger is designed exclusively for indoor use. It must not
be exposed to water or moisture.
e) Charge only in an ambient temperature between 15-25
n
degrees.
Fig.A 1. Keyless chuck
f) Do not insert metal objects of any kind into the charger.
2. Clutch control knob
3.
The device is dedicated to drive in and out screws, drilling boreholes in
4. Rotation direction switch
such materials as steel, wood, plastics, etc. The combo drill and
5. H andle
screwdriver is designed exclusively for DIY applications .
6. Strap for hanging on hand
Battery
device
Battery lock clip
On/off switch
11.
Fig.C
Fig.F
Fig.G
operation; use protective gloves when changing the drill bit).
- Throwing back machined object or its fragment.
- Bending/breaking the drill.
Device components (see page 2 )
APPLICATIONS AND CONSTRUCTION:
Despite using the tool according to its intended application it is
impossible to eliminate certain residual risk factors. Considering the tool
construction the following risks may occur when operating the tool:
- Touching the rotating drill bit with the hand
operator's clothes .
- Burns when changing drill bits (Drill bits heat up intensely during
The tool must not be used for work requiring a professional tool.
Any use of the that is not in observance with the above-
mentioned purpose is forbidden, leads to the loss of warranty, and
relieves the manufacturer from responsibility for the resulting damage.
Any modifications of the tool by the user relieve the manufacturer from
responsibility for any damage and injuries to the user and the
surroundings.
The set consists of a drill with a chuck, batteries - 2 pcs, charger and 13
accessories: a magnetic tip for bits with a 1/4" holder, bits - 6 pcs (P
H 1,
P H 2, PZ1, PZ2, SL5, SL6) and drill bits - 6 pcs (1 , 5 ; 2 , 5 ; 3 ; 4 ; 5 ; 6 mm).
Working bits set
or
Gear shifter
7.
8. Bit insert
9.
10.
Auxiliary lighting
12.
13.
Charger
14. Clutch setting indicator
15. Drilling setting pictogram
16. Left-threaded fixing screw
MODEL
Rotation speed under no-load conditions
Supply voltage
TCV14L2 TCV18L2
Chuck clamping range
Rechargeable battery
Rated voltage
Electric capacity
Charging time
Battery weight
B attery charger
Mains voltage
Output current
14,4 V 18 V
Gear shifter I-II
yes yes
Gear I : 0-400 rpm; Gear I I : 0-1500 rpm
0,8- 10 mm
14,4 V 18 V
1 h
1,5 Ah
100-240 V AC, 50 Hz, 30 W
Acoustic pressure level (LpA)
Acoustic power (LwA)
Vibration level according to: EN 60745-2-2
a (t
olerance of measurements K=1,5 m/s²)
h
2
0,52 m/s
77 dB(A)(t olerance of measurements K =3dB(A))
88 dB(A)(t olerance of measurements K =3dB(A))
TECHNICAL PARAMETERS
Li-ion
0,31 kg 0,36 kg
14,4 V DC; 1,3 A 18 V DC; 1,3 A
Maximum torque 28 Nm 22 Nm
Maximum drilling
diameter
Wood
Steel 22 mm
8 mm
26 mm
10 mm
Weight (with battery) 1,23 kg 1,28 kg
The vibration level value given refers to basic application of the tool. If the tool is used for other applications or with other tools, or if it is not maintained
properly, the vibration level may differ from the values given. The above-mentioned causes may lead to higher exposure to vibrations during the whole
work time.
One must implement additional safety measures to protect the operators from exposure to vibrations, such as maintenance of the electric tool
and work tools, assurance of proper hand temperature, or determination of the sequence of work operations.
Gear I : 0-400 rpm; Gear I I : 0-1500 rpm
0,8- 10 mm
1 h
1,5 Ah
100-240 V AC, 50 Hz, 35 W
77 dB(A)(t olerance of measurements K =3dB(A))
88 dB(A)(t olerance of measurements K =3dB(A))
2
0,52 m/s