Trolley
Inspection of Trolley
The Safety Rail Trolley system is designed to function as an integrated system and the use of non-compatible materials is
not recommended and may impair performance.
A visual inspection of the Trolley is required before each use. Some of the main inspection points include ensuring that
the compression spring is in place and not missing, ensure that all four rollers (wheels) are in place and secure, turning the
unit over to ensure that the SafetyLock™ orientation lock-out device moves freely. Always check Trolley before ascending
to ensure it runs free and locks properly onto the rail.
Detailed inspections should be conducted on a regularly scheduled basis as determined by user; a minimum two (2)
detailed inspections per year by a competent person other than the climber. If a component is worn or suspected faulty,
immediately notify your supervisor and do not attempt to use it. Any worn components must be removed from service
and permanently disabled before discarding to ensure no future use.
Cougar MAX Labeling
The serial number of each Trolley is located on the bottom of the Trolley, and uses the following convention:
YYMM### where ‘YY’ means Year, ‘MM’ mean Month and ‘###’ is the Counter.
ISO 9001 Registered
T
ROLLEY
O
PERATION
& M
AINTENANCE
I
NSTRUCTIONS
CSA Z259.2.1-98
Revision date: May 7, 2012
Cougar Manual:
4.957.1003.R01
(Part Number)
Cougar Max Trolley with Karabiner: 4.957.0037.001 (Part Number)
