EnTire Solution TPMS User Manual
15
© 2011 TRW Automotive, Parts & Service
2.12
Time Setting and Standard Pressure Setting
Parameter Setting Mode
Time Setting
The LCD Display Monitor indicates “Se—C” and the time is displayed. Change it to your local time
accordingly. Press “Set” button to move to the next data input step. (fig.2.11.1)
fig.2.12.1
Standard Pressure Setting
The LCD Display Monitor indicates (Se— P). Standard pressure is the cold tyre inflation pressure
recommended by the vehicle or tyre manufacturer. Please refer to your vehicle’s operation manual for
this value.
Tyre standard pressure is set axle by axle. Factory preset standard pressure values (bar) will be shown.
(fig.2.11.2)
fig.2.12.2
Input your tyre’s standard pressure value for the axle row using “Prog”, “Up” and “Down” buttons.
After setting is complete, press the "Set" button to confirm
2.13
Alarm Temperature Setting
Alarm Temperature Setting
After standard pressure input , it enters into alarm temperature setting
state. Pressure data field displays “Se—t”. The factory preset default value is 176 ºF ˜ 80 ºC. Use
function buttons to change it if you want a different threshold value. Press “Set” button to exit the setting
mode. (fig.2.13.1)
fig.2.13.1
The LCD Display Monitor is now ready for use!
Summary of Contents for EnTire Solution TPMS
Page 1: ......
