background image

 

 Scrub with straight light strokes.  You do not have to 

exert pressure the Orbis MotorScrubber 20 will do the 
work. 

WARNING

 – The Orbis MotorScrubber 20 is not designed 

for prolonged use under water 

WARNING

 – Automatic Shut-Off.  the Orbis 

MotorScrubber 20 is equipped with a self-resetting circuit 
breaker to prevent damage to the motor.  If the unit is 
stalled, the circuit breaker will interrupt the electrical power 
from your 12-volt battery.  Remove the Orbis 
MotorScrubber 20 from the work surface.  the circuit 
breaker will re-set in 6-10 seconds.  Resume using the 
Orbis MotorScrubber 20. 

IMPORTANT -

 Only chemicals recommended by the 

appliance manufacturer should be used, i.e. non-foaming, 
and follow the chemical manufacturers’ directions 
regarding use, handling, disposal and health and safety 
provisions. 

WARNING -

 If the detergent comes in contact 

with the eyes and/or skin or if swallowed, refer to the use 
and safety information booklet provided by the 
manufacturer of the detergent.

 

 

4.5 When cleaning is finished 

 

When cleaning is finished switch off the Orbis 
MotorScrubber 20 using the on/off switch button on the 
handle.   

 Remove brush or pad from machine and wash in warm 

soapy water. 

 

 
5. Storage 

 Always switch off, wipe down and dry the machine after 

use. 

 When storing the machine, ensure the pad/brush is 

removed  

  Store the machine in a dry indoor area only. 

 

6. Maintenance 
WARNING -

 Before undertaking maintenance operations 

or adjustments switch off machine, unplug from the 
electricity supply and disconnect the battery.  

IMPORTANT –

 All other servicing and repairs should only 

be performed by a Truvox engineer or Authorised Service 
Agent. 

IMPORTANT –

 Should the machine fail to operate 

please refer to the fault diagnosis section in the back of 
this instruction manual. If the problem / remedy is not listed 
please contact Truvox Customer Service Department for 
rapid attention. 
 
The machine requires minimum maintenance apart from 
the following checks by the operator prior to use:  

 

DO NOT

 rest tools and metal objects on the batteries; 

danger of short circuits. 

 

DO NOT

 use aggressive detergents, acid, lye etc. during 

cleaning and washing and take particular care with 
electrical parts. 

 Charging cord and plug - Regularly inspect sheath, plug 

and cord anchorage for damage or loose connection.  

 
 
 
 
 

7. After sales service 

Truvox machines are high quality machines that have 
been tested for safety by authorised technicians. It is 
always apparent that after longer working periods, 
electrical and mechanical components will show signs of 
wear and tear or ageing. To maintain operational safety 
and reliability the following service interval has been 
defined: Every year or after 250 hours. Under extreme or 
specialised conditions and/or insufficient maintenance, 
shorter maintenance intervals are necessary. Use only 
original Truvox spare parts. Use of other spare parts will 
invalidate all warranty and liability claims. Should you 
require after sales service please contact the supplier 
from whom you purchased the machine, who will 
arrange service. Repairs and servicing of Truvox 
products should only be performed by trained staff. 
Improper repairs can cause considerable danger to the 
user.  

 
8. Guarantee 

Your product is guaranteed for one year from the date of 
original purchase, or hire purchase, against defects in 
materials or workmanship during manufacture. Within 
the guarantee period we undertake at our discretion, to 
repair or replace free of charge to the purchaser, any 
part found to be defective, subject to the following 
conditions: 
 
C

ONDITIONS

 

1.  Claims made under the terms of the guarantee must 

be supported by the original invoice/bill of sale issued 
at the time of sale, or the machine Serial No. 

2.  For claims under this guarantee contact the supplier 

from whom you purchased the product who will 
arrange the appropriate action. Do not initially return 
the product as this could result in transit damage. 

3. Neither Truvox nor its distributor shall be liable for 

any incidental or consequential loss. 

4.  This guarantee is governed by the laws of England. 
5.  This guarantee does not cover any of the following: 

 Periodic maintenance, and repair or 

replacement of parts due to normal wear and 
tear. 

 

Damage caused by accident, misuse or neglect, 
or the fitting of other than genuine Truvox parts. 

  Defects in other than genuine Truvox parts, or 

repairs, modifications or adjustments performed 
by other than a Truvox service engineer or 
authorised service agent. 

  Costs and risks of transport relating directly or 

indirectly to the guarantee of this product. 

  Consumable items such as, brushes, drive 

discs, filters and vacuum skirts. 

 This guarantee does not affect your statutory rights, or 

your rights against the supplier arising from their sales 
or purchase contract. Truvox International Limited 
policy is one of continual product development and we 
reserve the right to alter specifications without prior 
notice.

 

 
 

Summary of Contents for Orbis MotorScrubber 20













Reviews: