Trust Precision Viewer Monitor
5
GB
4. Installing the driver
4.1
Windows 95 / 98 / Millennium Edition
These monitors satisfy the Microsoft Windows Plug and Play standard. The monitor will be automatically
detected when starting Windows 95 or 98.
1. Start Windows. After a short period, new hardware will be detected (Plug and Play monitor) and the 'Add
New Hardware Wizard' will start up.
2. Click on 'Next' to continue.
3. Insert the CD-ROM into your CD-ROM drive.
4. Select 'CD-ROM' to give the correct location of the driver.
5. Select ‘Precision Viewer Excellence Series’ and click on 'Next' to continue.
6. Follow the on-screen instructions to complete the installation.
You will not have to restart your computer after completing the installation.
4.2
Other operating systems
No driver is required for other operating systems, such as MS-DOS, Windows 3.1x or Windows NT.
5. Setting the resolution and refresh rate
See the table below for the optimal setting.
Precision Viewer 17”
Precision Viewer 19”
Resolution
1024 x 768
1280 x 1024
Refresh rate
85Hz
85Hz
Table 3: Optimal settings
Follow the instructions below to change the colour depth, resolution and refresh rate in Windows:
1. Go to your monitor's properties in the 'Control Panel' (Start - Settings - Control Panel and double click on
the 'Display' icon).
2. Click on the 'Settings' tab.
Note:
See Windows Help (F1) for more information about adjusting the colour depth, resolution and
refresh rate.
5.1 Colour
depth
1. Adjust the colour depth using: 'Color palette'.
2. Click on 'Apply'.
5.2 Resolution
1. Change the resolution by moving the slidebar for the 'Desktop area'.
2. Click on 'Apply' to accept the changes. Follow the on-screen instructions.
5.3
Adjusting the refresh rate
5.3.1 Windows 95 / 98 / 2000 / Millennium Edition
1. Click on the 'Advanced' button to adjust the refresh rate.