2.
Operational safety
The machine can result in the following dangers if it is used
inappropriately or for purposes other than those intended, or
else if it is not safe to operate:
■
Dangers to the safety of the operator.
■
Damage to the machine and to other property of the opera-
tor.
■
Negative effect on the effective functioning of the machine.
2.1
Intended use
The user may use the machine only in the industrial sector.
Installation, operating and transport conditions defined by
TRUMPF must be adhered to and maintenance work must be
carried out in accordance with the Operator's manual. The user
must observe the specifications of the country in which the
machine is being operated as well as national and regional
safety and accident prevention regulations.
The user may bend cold sheets using the machine.
The following is not permitted:
■
Unauthorized alteration or conversion of the machine by the
user or personnel.
■
Any working procedure that impairs the safety.
■
Processing of hot, splintering or brittle materials.
■
Use of tools from other manufacturers without release by
TRUMPF.
■
The storage of tools no longer required on the press beam.
Any use going beyond this is considered to be unauthorized
use. TRUMPF is not liable for any damage, especially personnel
injuries and production failures resulting from this. The risk is
borne solely by the operator. The warranty will be voided.
1
‐
4
Operational safety
2019-07-09
B1161en
Disclaimer
