Trumpf BendMaster 150, Operator'S Manual

Page: 182 / 258

Fig. 52488
3. Define the Recognition selection :
− No recognition :
No double sheet recognition is performed. However, a
separation method can be selected which is executed
when picking up a blank, regardless of whether a double
sheet was picked up or not. Likewise, the execution of
the program is continued after the separation cycle.
− Pallet scale :
A double sheet recognition is performed using the pallet
scale. The loading stack must be on the pallet scale. The
separation process is performed according to the set sep-
aration cycle only after recognizing that a double sheet
has been picked up. The execution of the program is
resumed after successfully separating the double sheet.
− Integrated system :
A double sheet recognition is performed with the inte-
grated measurement system. The separation process is
performed according to the set separation cycle only after
recognizing that a double sheet has been picked up. The
execution of the program is resumed after successfully
separating the double sheet.
6.12 Setting bending parameters
Parameters for bending support, backgauge sensor system,
approaching the backgauges and the actuation of the backstop
resistors can be set for every bending step in the bending
parameters.
4
‐
88
Running in a TruTops program 2015-06-01
B579EN