Trumpf BendMaster 150, Operator'S Manual

Page: 173 / 258

The loading stacks and unloading stacks found during the
rough recognition process are displayed in color.
Fig. 39931
2. Mark the desired stack in the "Stack" list. "Stack mode" is
displayed.
or
Ø Mark the desired stack in the graphic. "Stack mode" is
displayed.
Note
The coordinates of the starting point of the marked stack
are displayed at the coordinate arrows for the X and Z
directions.
Loading stack:
Stack mode Color
L stack active Blue
L height OK Gray
L coordinate OK Gray
L stack empty Red
L stack blocked Orange
L stack blocked Yellow
Tab. 4-18
Unloading stack:
Stack mode Color
A stack active Green
A stack ready Cyan
B579EN
2015-06-01 Running in a TruTops program
4
‐
79