Trumpf BendMaster 150, Operator'S Manual

Page: 167 / 258

Fig. 39926
Note
"Image [1/4]" means the first of four recorded images is dis-
played.
2. Increase the size of the recorded image with Zoom if
desired:
−
Activate zoom : A green window can be placed over the
area that is to be zoomed in. The zoomed in section is
displayed.
Activate zoom can be used to zoom in to the image
recording any number of times.
− Zoom out : image recording is reset from the currently
zoomed in section to the previous image detail.
The function can be repeated until the original size is
established.
− Zoom 100% : image recording size is reset to 100%.
− Deactivate zoom : Deactivates the activated zoom. The
green window is hidden.
3. Switch between the individual images using << and >> if
desired.
4. Position the blue cross-hairs from the top left corner of the
screen at the point where the height is to be measured and
the stack is to be searched for:
B579EN
2015-06-01 Running in a TruTops program
4
‐
73