Trumpf BendMaster 150, Operator'S Manual

Page: 130 / 258

Fig. 54686
3. Undo the four fixing screws using the Allen key (5 mm).
4. Remove the regripping station.
2.11 Setting the backstop resistor
regardless of the program
The backstop resistor can be set at the programmer user level
(see "Fig. 51840", pg. 4
‐
15) or higher, regardless of the pro-
grams and jobs.
Condition
■ Backstop resistors have been activated by the TRUMPF
Service Department.
1. Open > Press > Sensors for press > Backstop resistor .
4
‐
36
Operating the BendMaster 2015-06-01
B579EN