Trumpf BendMaster 150, Operator'S Manual

Page: 114 / 258

But-
tons Operating
mode How often should it be
pressed? Consequences
Manual mode
or TruBend
manual 1. Press once. ■ The active catch is
deactivated.
■ The RED button
lights up.
What happens if… Tab. 4-3
Note
If a person is still in the bending cell after starting the automatic
program:
■ Press the RED button on post 1 twice.
−
Press once: the system stops.
− Press a second time: The catch is deactivated for 30 s.
− Exit the bending cell.
− To reset the deactivation of the 30-second catch:
Press the GREEN button in the mounting device of the
portable manual control unit for at least 3 seconds.
or
− Press any EMERGENCY STOP button and press the
RED button on post 1 twice to deactivate the catch for
30 seconds.
1 GREEN button (post 1) 2 RED button (post 1)
Post 1 Fig. 41776
All EMERGENCY STOPs released :
■ At TruBend (control system and control panel).
■ On the portable manual control unit.
4
‐
20
Operating the BendMaster 2015-06-01
B579EN
Function button on the
portable manual control unit
Enabling conditions for
manual press (TruBend
without BendMaster)