3
SETUP AND FUNCTIONS:
–
When the parent and baby units are switched on and within range, a live image from the
camera will appear within a few seconds.
–
Place the camera in a suitable location and adjust the camera lens until you are satisfied
with the image on the parent unit.
Note: Do not place the baby unit within baby‘s reach. If there is interference on the picture
or sound, try moving the units to different locations, and ensure they are not close to other
electrical equipment that may interfere with the transmission.
Monitoring Screen Icons
1. Signal strength indicator
2. Temperature in baby’s room*
3. Melody is playing (adjust volume using the
“left” and “right” keys below the display)
4. VOX function activated
5. Alarm activated
6. Battery indicator
7. Microphone activated (push to talk)
8. Date and time
Note:
*
The baby monitor thermometer is not certified and the temperature data should
only be used as a general guideline.
Range
When the distance between the baby and parent unit is too far, the signal may be interrup-
ted and the image and sound may become frozen. If there is a connection loss due to the
units being out of range, a black screen is displayed and the message “Connecting…”. The
parent unit will try to reconnect to the camera.
Note: If the they do not reconnect even after the units have been brought within range, try
to pair the units again, see the following section “Camera – Pairing”.
