TrueLife NannyCam R360, Instructions For Use Manual

Page: 4 / 64

4 5
GETTING STARTED
A) Baby unit (camera)
1. Plug one end of the AC adapter into the input of the camera and the other into the mains
socket.
2. When the camera is functioning properly, the blue LED will be lit.
Note: The baby unit requires a permanent mains connection.
B) Parent unit (display)
1. Plug one end of the AC adapter into the input of the parent unit and the other into the mains
socket.
2. The parent unit will start charging and the blue LED will be lit.
3. Press the „ON / OFF“ button to turn on the device.
Note: To achieve optimal capacity and battery life, it is essential to fully charge the unit before
using it unplugged.