6
After using a special product in the reservoir (mouthwash), rinse the reservoir each
time. Partially fill the reservoir with clean warm water, direct the nozzle into the sink,
turn on and let it flow until the reservoir is completely empty. Regular flushing pre-
vents clogging and prolongs the life of the product.
3. Nozzles
Wash the nozzle with water and wipe with a cloth.
trouBleshooting
Problem
Cause
Solution
Water leaks at the
connection between the
nozzle and the handle
The nozzle was incorrectly
inserted
Remove nozzle and reattach
Periodontic nozzle is
damaged
Nozzle is old
Replace the nozzle with
new one
Water leaks from
the hose/handle
Hose/handle is damaged
Return the device
The reservoir leaks
Valve on the reservoir is
missing or incorrectly inserted
Install the valve correctly.
If there is no valve, contact
your dealer
Low water pressure
The reservoir is not seated
correctly
Make sure that the outlet is
working. Check the functio-
nality of the electrical socket
with other appliances
Water is leaking from
the device
The motor is switched off
Empty the reservoir and the
residual water from the hose.
The water smells
Dirt has settled in the nozzle,
reservoir or hose
Wash the reservoir, rinse the
hose with clean warm water
and replace the nozzle
sPecifications
Power consumption
18 W
Voltage
AC100~240 V
Frequency
50/60 Hz
Water resistance
IPx7
Pressure range
30-125 PSI
Reservoir volume
600 ml
Weight
955 g
Dimensions
192×115×271 mm
