background image

............ www.truemfg.com ............

INSTALLATION MANUAL FOR TCGG MODELS 

(CURVED GLASS DELI CASE)

TCGG MODELS 

(CURVED GLASS DELI CASE)

CONGRATULATIONS! 

You have just purchased the finest commercial 

refrigeration available. You can expect many years 

of trouble-free operation.

TRUE FOOD SERVICE EQUIPMENT, INC.

2001 East Terra Lane • O’Fallon, Missouri 63366-4434

(636)-240-2400 • FAX (636)272-2408 • INT’L FAX (636)272-7546 • (800)325-6152

Parts Department (800)424-TRUE • Parts Department FAX# (636)272-9471

TABLE OF CONTENTS

Safety Information

Safety Precautions  –––––––––––––––––––––––––  1
Proper Disposal ––––––––––––––––––––––––––––  2
Connecting Electricity  –––––––––––––––––––––––  4
Adapter Plugs  –––––––––––––––––––––––––––––  4

Installation / Operation Instructions

Ownership  –––––––––––––––––––––––––––––––  4
Required Tools  ––––––––––––––––––––––––––––  4
Uncrating  ––––––––––––––––––––––––––––––––  4
Location  –––––––––––––––––––––––––––––––––– 5
Leveling Cabinet  –––––––––––––––––––––––––––  5 
Defrost Timer Instructions (Grasslin Timer) ––––––––  6
Conductors and Circuits ––––––––––––––––––––––– 7
Electrical Instructions & Start-up  –––––––––––––––– 8
Sealing the Cabinet to the floor ––––––––––––––––  9
Shelving Installation & Operation  ––––––––––––– 9-10

 

Maintenance, Care & Cleaning

Temperature Control Adjustment  ––––––––––––––  11
Cleaning Condenser Coil  ––––––––––––––––––  12-13
Stainless Steel Equipment Care & Cleaning –––––  14-15
Light Bulb Replacement –––––––––––––––––––––  15
Warranty (U.S.A. & CANADA ONLY!) –––––––––––––– 16

TCGG-48-S

TCGG-72-S

*Spanish, German, and French versions included.

#912627 • WP-99

Summary of Contents for TCGG-48-S



















Reviews: