background image

............ www.truemfg.com ............

INSTALLATION MANUAL FOR 

TCGD DISPLAY CASES (DRY BAKERY) MODELS

CURVED GLASS DISPLAY CASES 

- DRY BAKERY - 

CONGRATULATIONS! 

You have just purchased the finest display case

 available. You can expect many years of 

trouble-free operation.

TCGD-77

TCGD-50

TRUE FOOD SERVICE EQUIPMENT, INC.

2001 East Terra Lane • O’Fallon, Missouri 63366

(636)-240-2400 • FAX (636)272-2408 • INT’L FAX (636)272-7546 • (800)325-6152

Parts Department (800)424-TRUE • Parts Department FAX# (636)272-9471

TABLE OF CONTENTS

Safety Information

Safety Precautions  ––––––––––––––––––––––  1
Proper Disposal –––––––––––––––––––––––––  2
Connecting Electricity  –––––––––––––––––––  3
Adapter Plugs  ––––––––––––––––––––––––––  3

Installation / Operation Instructions

Ownership  –––––––––––––––––––––––––––––  4
Required Tools  ––––––––––––––––––––––––––  4
Uncrating  ––––––––––––––––––––––––––––––  4
Locating  –––––––––––––––––––––––––––––––  5 
Leveling Cabinet  ––––––––––––––––––––––––  5
Electrical Instructions  ––––––––––––––––––––  6
Start-up  ––––––––––––––––––––––––––––––––  6
Wire Gauge Chart  –––––––––––––––––––––––  7
Shelving Installation  –––––––––––––––––––––  8
Installing Optional Castors  –––––––––––––––  9
Installing Optional Laminate Kit  ––––––––––  10

Maintenance, Care & Cleaning

Optional Sealing Cabinet To Floor  ––––––––  11
Cabinet Cleaning  ––––––––––––––––––––––  11
Light Bulb Replacement –––––––––––––––––  12
Warranty (U.S.A. and Canada ONLY!)  –––––  13

* Spanish, German, French and Dutch versions included.

#912625 • RD 3/13

Summary of Contents for TCGD
















Reviews: