manualshive.com logo in svg

True G4SM, Installation Manual

Introducing True G4SM installation manual - a comprehensive and user-friendly guide to effortlessly set up your True G4SM product. This detailed manual is available for free download at manualshive.com, ensuring you have all the information you need to get started with your True G4SM, hassle-free.

Share
Download
background image

TEC_TM_105 REV. A

03/19/2021 

Page 1 of 22

GDM FREEZER/REFRIGERATOR

INSTALLATION MANUAL

Congratulations!

You have just purchased the finest commercial refrigerator 

available. You can expect many years of trouble-free operation.

Table of Contents

Safety Information

Safety Precautions & Proper Disposal .....................................................3

Prior to Installation

Ownership .........................................................................................................4
Cabinet Specification & Location ..............................................................4
Notice to Customer ........................................................................................4

Installation

Wiring Instruction Advisement  .................................................................5
Wire Gauge Chart  ...........................................................................................5
Uncrating  ..........................................................................................................6
Leveling Leg, 6" Leveling Leg & Castor Installation  ...........................7
Locating and Leveling  ..................................................................................7
Sealing Cabinet to the Floor  ......................................................................8
Electrical Installation & Safety .................................................................10

Cabinet Setup

Standard Accessories  .................................................................................11
Shelf Installation and Adjustment  ........................................................11

Cabinet Operation

Startup  ............................................................................................................13
Temperature Control & Light Switch Location  .................................13

Maintenance, Care, Cleaning

Condenser Coil Cleaning  ..........................................................................15
Stainless Steel Care & Cleaning & 8 Tips to Help Prevent Rust  ...17

Cabinet Adjustments, Servicing & Component Replacement

Servicing & Replacing Components......................................................18
Slide Door Operation – Door Removal  ...............................................18
Slide Door Operation – Door Adjustment  .........................................20
Slide Door Operation – Hold-Open Feature  .....................................20

Warranty

Warranty  .........................................................................................................21

 TRUE 

MANUFACTURING CO., INC.

North America – Canada  

and Caribbean

Warranty Phone: +1 855 878 9277

Warranty Fax: +1 636 980 8510

Technical Phone: +1 855 372 1368

Warranty Email: 

 [email protected]

Technical Email:

 [email protected]

7:00 – 7:00 CST Monday – Thursday.

7:00 – 6:00 Friday. 8:00 – 12:00 Saturday.

Mexico

Phone: +52 555 804 6343/44

Toll Free in Mexico: 01 800 202 0687

[email protected]

9:00 am – 5:30 pm M–F

Latin America

Phone: +56 232 13 3600

[email protected]

9:00 am – 5:30 pm M–F

UK, Ireland, Middle East, 

Africa and India

Phone: +44 (0) 800 783 2049

[email protected]

8:30 am – 5:00 pm M–F

European Union and 

Commonwealth of 

Independent States

Phone: +49 (0) 7622 6883 0

[email protected]

8:00 am – 5:00 pm M–F

Australia

Phone: +61 2 9618 9999

[email protected]

8:30 am – 5:00 pm M–F

INSTALLATION MANUAL

GDM FREEZER/REFRIGERATOR

Original Instructions

TRUE MANUFACTURING CO., INC.

2001 East Terra Lane • O’Fallon, Missouri 63366-4434
(636)-240-2400 • FAX (636)-272-2408 • International FAX (636)272-7546 • (800)-325-6152
Parts Department (800)-424- TRUE • Parts Department FAX# (636)-272-9471

GDM-26-HC~TSL01

GDM-69-HC-LD

GDM-49-HC~TSL01

Summary of Contents for G4SM























Reviews:

No comments

Related manuals for G4SM

Nordcap MINOR 2000 Instruction Manual preview
MINOR 2000
Brand: Nordcap Pages: 37

Brands by name

Popular brands

Load more brands