Item# 258712
Model# RXTV-2003-SET
FS Stonington 7 PC Set - Dining Table
Assembly Instructions
Step 1:
Remove protective wrapping and lay all parts on floor. Identify all parts packed in carton against
attached parts list.
Step 2:
Lay Table Top Frame (A) upside down on floor, so bottom is facing up. Place a protective soft material
on floor before placing table top face down on floor.
Step 3:
Then attach each of six legs (B) to the bottom as shown in Diagram 1, using Bolt (D), and Washer (F)
and Bolt cover (G). Then attach round Stretcher (C) to each Leg (B) using Bolt (E) and Washer (F) and
Bolt Cover (G) as shown in Diagram 2.
Step 4:
Make sure all bolts are aligned properly and tightened sufficiently. Then place bolt covers over bolts
and turn the table over onto it’s legs carefully using a flat surface as shown in Diagram 3.
NOTE: IT IS USER’S RESPONSIBILITY TO MAKE SURE ALL PARTS ARE ASSEMBLED AND TIGHTENED
PROPERLY AND SECURELY.
WARNING!: TABLE IS NOT MEANT FOR SITTING. DO NOT SIT OR LEAN FULL BODY AGAINST TABLE.
Diagram 1
A
G
D
F
B
