7
2 PRODUCT DESCRIPTION
2.1 FRONT
1
Cutting wheel
Cut terminals
Press
START
button
→ The cutting disc rotates and cuts the terminal.
2
Box LED
Provide light for the position checking camera.
Adjust the LED brightness via the LCD screen.
3
Position checking
camera
Check a cutting position.
Only valid when using with CS07HI software.
Refer to
CS07HI Instruction Manual
for details on usage.
4
Grinding disc
Grind the terminal surface.
Only activate in standard cutting mode.
CS07 automatically grinds the surface after cutting it, or when pressing
START
button at grinding mode.
5
Ring LED
Provide light for USB camera.
Adjust the Led brightness via the LCD screen.
6
USB Camera
Connect with your computer to take cross-section photos
7
Microscope lens
Connect with USB camera and ring LED
8
Clamp Transfer Unit
Set the clamp onto this unit. It is a moving part that moves the clamp to
cutting disc and grinding wheel during operation.
9
START / RETURN
button
Press
START
button
→ CS07 automatically cut and/or grind the
terminals
10
LCD Operation Panel
Control the operation (cutting, grinding, changing LED brightness....)
11
EMERGENCY
button
Immediately stop the machine if there are abnormalities.
12
Clamp Holding Stand
Set the clamp onto this stand
→ Take cross-section photos
1
2
5
6
4
7
8
9
11
10
3
12