9
3 OPERATION OF LCD PANEL
3.1 HOME SCREEN
1
Display the current type of clamp.
CS07 automatically changes operation mode depending on the type of clamp.
2
Cutting button (mode). Select it to activate/ deactivate it.
Green: Activate White: Deactivate
3
Grinding button (mode). Select it to activate/ deactivate it.
Green: Activate White: Deactivate
※
Grinding mode is automatically turned off at longitudinal cut.
4
Select the cutting speed
– 3 modes (Refer to P.14 for details)
5
Give instructions and show the current state of CS07
6
Increase the brightness of Ring LED (USB camera) Range: 1~16
7
Decrease the brightness of Ring LED (USB camera) Range: 1~16
8
Increase the brightness of box LED (Position checking camera) Range: 1~16
9
Decrease the brightness of box LED (Position checking camera) Range: 1~16
10
Move the Clamp Transfer Unit to its HOME postion.
11
Advanced Settings
3.2 ADVANCED SETTINGS
1
Select a language (English/ Chinese/ Japanese)
2
Activate/ deactivate the vacuum unit. Turn this function off if the vacuum unit is not installed
3
Move the clamp transfer unit to the left/ right.
Use this function when cleaning/ replacing the cutting/ grinding wheel.
4
Display the instruction manual by reading this QR code
1
2
3
4
6
7
8
9
10
11
1
2
3
4
5