Item number: E43789
M A N A G E R E Z C H A I R
1. To Adjust Seat Height:
While seated, lean forward and reach under the right
side of the chair to find the handle. Lift the handle and
raise your body up slightly to allow the chair to rise to
the desired height. To lower the seat, lift the handle
while applying more weight downward on the seat. The
chair will descend until the handle is released or the
chair reaches the bottom position.
2. To Operate Tilt Lockout:
While seated, reach under the right side of the chair to
find the height adjustment handle. Pull the handle all
the way out (away from the seat plate) to allow the chair
to tilt backwards. To lock the chair in the upright or
vertical position, sit upright and push the handle in
towards the seat plate.
3. To Adjust Tension On The Tilt
Mechanism:
Reach under the front center of the chair, grasp the
round knob and turn counter - clockwise to make the tilt
mechanism firmer (stiffer). To make the tilt mechanism
less firm, turn the knob clockwise until the desired
resistance is found.
4. To Disassemble The Back Cushion:
Standing behind the chair, insert a wrench end into arm
hole position on both sides of the arms to release the
pins. Both pins must be disengaged at the same time.
Push the back cushion forward and fold the back
cushion on seat cushion. (Refer to Diagram 1 and
Diagram 2 for proper disassembly)
Please check to ensure that you have received all the parts for the assembly of this chair. If you
find any missing or damaged parts, do not return to the store. UK customers are to call
0-800-051-6775 for assistance. Please note that a receipt is required for all warranty replacements.
This chair has been tested and approved for normal use which is defined as a standard work week
of forty hours by a person weighing less than 250lbs (113kg).
Service hours are: UK Standard Time: 2:00 pm-1:00 am Monday
– Friday.
OPERATING INSTRUCTIONS
