STEP 2:
Install the rails to canister
Rear attachment rail tab
Bearings enter
channel of rail
here
STEP 3:
Install the front cover
Slide on front cover and attach here on both
sides with the (2) 10-24 x 3/4” screws. Use
the 1/8” Allen wrench.
STEP 1:
Remove Shipping Materials
Remove shipping
brackets and white
shipping tubes from
both sides of canister.
Keep shipping
bracket for STEP 4
STEP 4:
Lift the assembled cover into the bed and
position the rails
Attach both rails to
canister using the
10-32 x 7/16” rail
to canister
mounting screws.
Make certain the
rail tabs are on
the inside of the
spiral.
Passenger rail has green sticker.
Using two people, lift the cover and place it at the very
front of the bed. Close the tailgate of the pickup.
1/8” gap
Tailgate
Protector
Tailgate
Move the rails to
achieve the 1/8” gap
using the 1/8” part at
the top of the
bracket. Make certain
the rails do not move
after measuring.
STEP 2:
Install the rails to canister
Rear attachment rail tab
Bearings enter
channel of rail
here
STEP 3:
Install the front cover
Slide on front cover and attach here on both
sides with the (2) 10-24 x 3/4” screws. Use
the 1/8” Allen wrench.
STEP 1:
Remove Shipping Materials
Remove shipping
brackets and white
shipping tubes from
both sides of canister.
Keep shipping
bracket for STEP 4
STEP 4:
Lift the assembled cover into the bed and
position the rails
Attach both rails to
canister using the
10-32 x 7/16” rail
to canister
mounting screws.
Make certain the
rail tabs are on
the inside of the
spiral.
Passenger rail has green sticker.
Using two people, lift the cover and place it at the very
front of the bed. Close the tailgate of the pickup.
1/8” gap
Tailgate
Protector
Tailgate
Move the rails to
achieve the 1/8” gap
using the 1/8” part at
the top of the
bracket. Make certain
the rails do not move
after measuring.
Rear attachment rail tab
Front attachment rail tab
Bearings enter
channel of rail
here
STEP 3:
Install the front cover
Slide on front cover and attach here on both
sides with the (2) 10-24 x 3/4” screws. Use
the 1/8” Allen wrench.
Remove shipping
brackets and white
shipping tubes from
both sides of canister.
Keep shipping
bracket for STEP 4
STEP 4:
Lift the assembled cover into the bed and
position the rails
Attach both rails to
canister using the
10-32 x 7/16” rail
to canister
mounting screws.
Make certain the
rail tabs are on
the inside of the
spiral.
Passenger rail has green sticker.
Using two people, lift the cover and place it at the very
front of the bed. Close the tailgate of the pickup.
1/8” gap
Tailgate
Protector
Tailgate
Move the rails to
achieve the 1/8” gap
using the 1/8” part at
the top of the
bracket. Make certain
the rails do not move
after measuring.
Attachment rail tab
Pg. 2
Lift up lock cover, unlock and open by pressing release button.
Pull cover out 10" - 12". Ensure the cover remains rolled out at
all times when installing rails to canister to prevent lockout of
the cover after installation. DO NOT allow cover to roll
back into canister until rail is installed.
UNCONTROLLED
DOCUMENT
