Truckman Retrax Series, Manual

Page: 2 / 10

Pre-assembly Guidelines
F
E
G
D
A
B
Parts in large box
Parts in rail box
(2) rubber washers A
(2) drain tubes B
(4) clamps (6 clamps for 8’
beds) C
(2) 10-24 x 3/4” font cover
mounting screws D
(4) 10-32 x 7/16” rail to
canister mounting screws E
6mm Allen wrench F
1/8” Allen wrench G
Tools Required
 #2 Philips screwdriver
 9/16” or 1/2” wrench (ratchet works best)
 Pliers or vice grips
Pre-assembly Guidelines
F
E
G
D
C C
A
B
Parts in large box
Parts in rail box
 Dr Driivver s er side rail
 P Pas asssen engger s er side rail
 C Cllam amp b p box ox
(2) rubber washers A
(2) drain tubes B
(4) clamps (6 clamps for 8’
beds) C
(2) 10-24 x 3/4” font cover
mounting screws D
(4) 10-32 x 7/16” rail to
canister mounting screws E
6mm Allen wrench F
1/8” Allen wrench G
Tools Required
 #2 Philips screwdriver
 9/16” or 1/2” wrench (ratchet works best)
 Pliers or vice grips
Please read all instructions before assembling the bed cover.
Keep boxes and packaging until installation is complete. Unpack carefully to prevent
scratching. DO NOT remove protective films from cover and canister until after installation is
complete.
DO NOT LUBRICATE OR USE LOCTITE ON TRUCKMAN
RETRAX
! ! (VOIDS WARRANTY) See
maintenance page for proper care.
Clamp Box and Drain Tube Kit
• Instruction packet
• Cover rolled into canister-spiral assembly
• Front cover for canister
• Keys
• Drain tube kit
Pg. 1
UNCONTROLLED
DOCUMENT