47
9
» Pneumatic Disc Brake SL7 - SM7
CALIPER BEARINGS REPLACEMENT
9.3 Replacement of Guide Sleeve (6) Floating
Bearing
For ease of reference, each component of a tool is referred to
by an identification number (see section 2.1).
Guide sleeve variants are:
6a - Rubber bush
6b - Open bearing
6f - Double Roll Bearing
The following tool combinations are used depending on the
variant:
Guide sleeve (6a rubber bush and 6b open bearing) requires
tool (
R
) - (
R
1
) for removal and (
R
2
) for fitting (see Fig.9.3a).
Washer
DIN 125
Washer
DIN 125
Tool combination
for removing
(6a/b)
Tool combination
for fitting (6/b)
Grub screw
DIN 915
9.3a - Tool combination (
R
)
9.3 - Remove parts as described
*
Variants
Double roll bearing (6f) requires tool (
U
1
) for removal and
(
U
2
) for fitting (see Fig. 9.3b).
9.3b - Tool combination (
U
1
) and (
U
2
)
Tool combination for removing (6f)
Note:
The supplementary tool kit K209211K50 includes all the
components for tool combinations (
U
1
) and (
U
2
).
Tool combination for fitting (6f)
T22
T22
(R)
(R
1
)
(R
2
)
(Ø 39 mm)
T06
T21
T19
T20
T18
T20
6a*
6b*
6f
39a*
68a*
68f
39b*
39f
(U)
TB17
TB17
TSY10
TSY01
TSY06
TSY02
TSY07
TSY01
TSY04
TSY02
(U
1
)
(U
2
)
