background image

AMP-440

4 Channel / 2 Zone

 Compact Media Amplifier

USER MANUAL

1. Read these instructions – All the safety and operating 
instructions should be read before this product is operated. 
2. Keep these instructions – The safety and operating 
instructions should be retained for future reference. 
3. Heed all warnings – All warnings on the appliance and in 
the operating instructions should be adhered to. 
4. Follow all instructions – All operating and use 
instructions should be followed. 
5. Do not use this apparatus near water – The appliance 
should not be used near water or moisture – for example, in 
a wet basement or near a swimming pool, and the like.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in 
accordance with the manufacture’s instructions.
8. Do not install near any heat sources such as radiators, 
heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat. 
9. Do not defeat the safety purpose of the polarized or 
grounding plug. A polarized plug has two blades with one 
wider than the other. A grounding plug has two blades and 
a third grounding prong. The wide blade or the third prong 
is provided for your safety. If the provided plug does not fit 
into your outlet, consult an electrician for replacement of 
the obsolete outlet.
10. Protect the power cord from being walked on or 
pinched particularly at the plugs, convenience receptacles, 
and at the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the 
manufacturer.
12. Use only with the cart, stand, tripod, bracket, 
or table specified by the manufacturer, or sold 
with the apparatus. When a cart or rack is used, 
use caution when moving the cart/apparatus 
combination to avoid injury from tip-over.
13. Unplug the apparatus during lightning storms or when 
unused for long periods of time.
14. Refer all servicing to qualified personnel. Servicing is 
required when the apparatus has been damaged in any 
way, such as power supply cord or plug is damaged, liquid 
has been spilled or objects have fallen into the apparatus 
has been exposed to rain or moisture, does not operate 
normally, or has been dropped.
15. CAUTION: These servicing instructions are for use by 
qualified service personnel only. To reduce the risk of 
electric shock, do not perform any servicing other than that 
contained in the operating instructions unless you are 
qualified to do so.
16. Do not install this equipment in a confined or building-in 
space such as a book case or similar unit, and remain a 
well ventilation conditions at open site. The ventilation 
should not be impeded by covering the ventilation 

openings with items such as newspaper, table-cloths, 
curtains etc.
17. WARNING: Only use attachments/accessories 
specified or provided by the manufacturer (such as the 
exclusive supply adapter, battery etc).
18. WARNING

To reduce the risk of fire or electric shock, 

do not expose this apparatus to rain or moisture. The 
apparatus shall not be exposed to dripping or splashing 
and that objects filled with liquids, such as vases, shall not 
be placed on apparatus.
19. WARNING: The mains plug is used as disconnect 
device, the disconnect device shall remain readily 
operable. 
20. This equipment is a Class II or double insulated 

electrical appliance. It has been designed in such a 
way that it does not require a safety connection to 
electrical earth.

21. Correct Disposal of this product. This marking indicates 

that this product should not be disposed with other 
household wastes throughout the EU. To prevent 
possible harm to the environment or human health 

from uncontrolled waste disposal, recycle it responsibly to 
promote the sustainable reuse of material resources. To 
return your used device, please use the return and 
collection systems or contact the retailer where the product 
was purchased. They can take this product for 
environmental safe recycling.
22. 

- This lightning flash with arrowhead symbol within an 
equilateral triangle is intended to alert the user to the 
presence of non-insulated “dangerous voltage” within 
the product’s enclosure that may be of sufficient 
magnitude to constitute a risk of electric shock.
- Warning: To reduce the risk of electric shock, do not 
remove cover (or back) as there are no 
user-serviceable parts inside. Refer servicing to 
qualified personnel.
- The exclamation point within an equilateral triangle is 
intended to alert the user to the presence of important 
operating and maintenance instructions in the 
literature accompanying the appliance.

Summary of Contents for AMP-440









Reviews: