rollers
GR7000C GOLF GREENS ROLLER - Operation, Maintenance & Parts Manual
ATTACHING DRAWBAR TO TRAILER ARMS
•
Locate the drawbar assembly.
•
Gather the ends of the right and left trailer arms.
•
Place the drawbar assembly between the trailer arms and align the holes, ensure the bend is
upwards.
•
Place one 2-1/4” x 3/8” bolt through each hole, fit 3/8” Nyloc nut to each bolt & tighten securely
•
Test to ensure the trailer latch is correctly locking the trailer arms in the down position. This is
important when trailing the machine. Use the catch locking pin when transporting the roller, for
safety.
ATTACHING WHEELS TO TRAILER ARMS
•
Locate the two wheels for the left and right side trailer arms
•
Check tires for the correct air pressure, approximately 15psi. Do not exceed this pressure.
•
Remove wheel nuts from both hubs, slide wheels onto hub with air valves facing outwards. Replace
wheel nuts & tighten securely.
