background image

 

INTRODUCTION 

 
 

Thank you for purchasing a TruJump product! This trampoline was designed and manufactured with 

quality materials and craftsmanship, providing fun and exercise in the enjoyment of your own backyard. 
 

It is very important that the owners and users of this trampoline have adequate knowledge of 

techniques and rules for proper use. In particular, children must be supervised at all times by a knowledgeable 
and mature adult while using the trampoline. Take precautions to prevent access to the trampoline by children 
when there is no adult supervision. Also restrict access to any unauthorized users without your consent.  
 

Carefully read and understand all of the instructions and warnings in the User Manual before 

assembling and using this product. It is the responsibility of the owner of this trampoline to ensure that all users 
of this product are fully informed on the proper use and the inherent risks of jumping on a trampoline. Failure to 
do so can result in serious injury or death. In particular, under no circumstances should you attempt or allow 
flips, somersaults or any similar conduct. Landing on the head or neck can cause serious injury, paralysis, or 
death, even when landing in the middle of the mat. Also, do not allow more than one person on each 
trampoline under any circumstances. Use by more than one person at the same time increases the chance of 
injury. 
 

To reduce risks associated with users falling off the trampoline, enclosure netting must be properly 

installed and used at all times. The trampoline enclosure must be closed during use to prevent the user from 
falling off the trampoline. Your trampoline enclosure netting is manufactured with UV resistant material. Despite 
this, exposure to harsh elements (sunlight, wind, moisture, animals, etc) will weaken the netting. The netting 
and mat must be inspected prior to every use and maintained regularly as detailed in this User’s Manual. 
 

Please also ensure proper placement of this product to avoid injuries. It is essential that the intended 

site for this trampoline is completely flat and level. If the ground is uneven, this could cause movement in the 
frame and stress on the joined sections of the frame that could damage the trampoline and/or can cause 
serious injury. Do not position this trampoline on hard surface such as concrete, tarmac or paving. Suitable 
surfaces include flat dirt or grass, sand or play area covered with an appropriate depth of play bark material, 
with no obstructions above, below or near the product.  

The product must not be used in windy conditions as wind can cause unexpected movement of the 

product. Wind can cause the trampoline to be lifted off the ground and become airborne. This can present a 
danger to individuals and to property. Winds can be especially strong in open areas, foothills, mountains, 
locations subject to hurricanes and tornadoes, areas between homes that create wind tunnels and anywhere 
else where local weather conditions can create high winds. We recommend that you anchor the trampoline or 
otherwise secure the trampoline to prevent it from moving as a result of the wind. One possible way to anchor 
the trampoline is to secure the trampoline to a concrete footing under each leg. We recommend consulting a 
local licensed contractor to best determine how the anchor system should be constructed for your specific 
conditions. The licensed contractor can also advise you of other options such as below ground installation. 
Even with anchors, a trampoline can be lifted, just like anything else, by strong winds. If the winds are 
anticipated to be very strong, the trampoline should be disassembled and stored away safely until the weather 
conditions improve. Damage from the wind or other severe weather is not covered by the manufacturer’s 
warranty. Because the manufacturer warranty does not cover wind or weather-related damage and damage 
can be caused to your property or the property of others by a windblown trampoline, it is strongly advised that 
you provide site specific anchoring through a licensed local contractor. 
 

Only genuine replacement parts sold through our authorized dealer are recommended. Replacement 

parts from other sources may not have been designed, tested or manufactured to manufacturer standards. 
Because of this, the manufacturer cannot guarantee the performance and safety of the product when non-
genuine replacement parts are used. The use of non-genuine replacement parts may affect any warranty claim 
on the product, as allowed by the law in your jurisdiction. 

The manufacturer warrants its products against 

defects in material and workmanship. Please refer to our warranty policy at the back of this manual for 
details.   
 

DO NOT RETURN PRODUCT TO THE STORE. FOR CUSTOMER SERVICE OR REPLACEMENT PARTS, 

PLEASE CALL 

1-888-965-0565 MON-FRI 9AM – 5PM Eastern Time  

OR email [email protected]

 

Summary of Contents for STR-10FT









































Reviews: