Troxler ICO 4740, Manual Of Operation And Instruction, Page: 76 / 171

5-4
BURN SETUP MENU
The
Burn Setup Menu
is used to configure the parameters of
the burn mode and to turn the
Auto-Print
and
Auto-Store
functions on or off. To display the
Burn Setup Menu
, press
(
1
)
at the
MAIN MENU
. The oven displays:
Burn Setup Menu
1. Burn Parameters
2. Set Chamber Temp
3. Auto-Print
4. Auto-Store
BURN PARAMETERS
The oven offers two burn modes:
Program Time
and
Auto-
Control
. In the
Program Time
mode, the burn time is set
manually. In
Auto-Control
mode, the oven automatically
completes a burn cycle when the incremental mass decrease of
the sample falls below a cutoff limit specified by the operator.
The burn mode is selected from the
Burn Parameter Menu
.
This menu is also used to select the calculation type (
bitumen-
to-sample
or
bitumen-to-aggregate
) and burn profile (
Default
,
Option 1
, or
Option 2
).
To access the
Burn Parameter Menu
, press
(
1
)
at the
Burn
Setup Menu
. The oven displays the following screens. Use the
up and down arrows to scroll through the menu options.
Burn Parameter Menu
↕
1. Burn Mode
2. Burn Time
3. Cutoff Limit