Troxler Enhanced RoadReader Plus 3451, Manual Of Operation And Instruction

Page: 28 / 247

Model 3451 1–
UNPACKING AND INSPECTION
Troxler recommends that the operator wear a dosimeter while
working with the gauge. Upon receipt of the gauge from the factory,
perform a complete inspection and inventory. If the shipping case
and/or any other part or accessory appears damaged, notify the
carrier and your Troxler Representative
immediately .
Check the shipping cases for the items listed on page 1–8. In
addition, the shipping cases should contain the
Gauge Warranty and
a Source Certificate.
For shipping to another location or back to the factory, save the
boxes and any packing material. For shipping instructions and
regulations, please see
Appendix D .
NOTE
Charge the 3451 batteries for 2.5 hours prior to initial
use. Install the PDA battery pack and charge the PDA as
directed in the Quick Start Guide provided with the unit.
NOTE
If the PDA battery pack is completely discharged when
the gauge and accessories are unpacked, charge the PDA
for 4 hours before use. Refer to the Quick Start Guide
provided with the unit for instructions on installing and
charging the battery pack.
Lift the gauge from the transport case and inspect the outside
surface for damage. Check the lock on the source rod handle and
make sure the keys fit. Remove the lock, release the trigger, and
check the source rod operation. It should move up and down with
little effort. Return the gauge to the transport case.
1
. I
NT
RO
DUCT
IO
N