Troxler Enhanced RoadReader Plus 3451, Manual Of Operation And Instruction

Page: 189 / 247

Figure C–6. Drift Test Menu
The PDA displays To perform a Drift test, place the gauge
on the standard block with the source rod in the STD
position and click OK.
Ensure that the gauge is positioned
properly and press
〈
OK
〉
.
As noted earlier, the gauge takes five 4-minute counts. Upon
completion, the PDA displays the raw counts (see Figure C–7).
When finished reviewing the counts, press
〈
Continue
〉
. The PDA
displays the average counts for each system and indicates if the test
passed or failed, as shown in Figure C–8. Press
〈
Yes
〉
to accept the
drift test results, or
〈
No
〉
to reject them. The PDA displays a
confirmation message. Press
〈
ok
〉
to return to the Drift Test Menu .
Reviewing the Drift Test
To review the results of the most recent drift test, press the
〈
Review Drift Test
〉
button on the Drift Test Menu . The PDA
displays the results of the last drift test as shown in Figure C–9. To
scroll through the data, press the scroll bar using the stylus. Press
〈
Done
〉
to return to the
Drift Test Menu
.
Appendix C–6