Troxler 3430 Plus, Manual Of Operation And Instruction

Page: 110 / 218

8–12
AUTO-STORE
The Auto-Store function automatically stores sample data upon
completion of a measurement. The data is stored under the active
project, using a sequential sample ID number. When a new project
is created, the sample ID number for the
Auto-Store function starts
at 1 and is incremented each time a new measurement is stored
automatically or manually.
To access the Auto-Store function, press
〈
8
〉
at the
Projects
menu
shown on page 8–2. The gauge displays:

To return to the
Projects
menu without changing the Auto-
Store status, press
〈
ESC
〉
.

To turn the Auto-Store function on, press
〈
1
〉
.

To turn the Auto-Store function off, press
〈
2
〉
. The gauge
updates the Auto-Store status, displays a brief confirmation
message, and returns to the
Projects
menu.
ACTIVE PROJECT SELECTED
If the operator attempts to enable the Auto-Store function and a
project has been selected as active, the gauge enables the Auto-Store
function, briefly displays the confirmation message shown below,
and then returns to the
Projects
menu.

 
 
   

  
 
   