4
Transport, storage and packaging
Delivery check
Check delivered items immediately after arrival for
transport damage and completeness. In case of any
damage or an incomplete shipment, contact the
shipping company and your supplier immediately.
A complete shipment includes:
Electronic controller in a closed two-part
casing, including:
–
Bracket for the cover
–
2 cable glands, plastic (black)
–
2 cable clips for strain relief (reusable)
–
Flow rate transducer (with tubes con-
nected)
–
2-pin plug connector for connection X1
–
3-pin plug connector for connection X5
(sensor AI)
–
Network patch cable, 5 m, S-FTP green
(only for fume cupboard controllers,
equipment function FH-xxx)
Expansion modules as ordered (see delivery
note)
Operating and installation manual
TCU3 is usually factory mounted to a TROX VAV
terminal unit.
If any expansion modules have been ordered, the
controller is factory fitted with these modules and
shipped as a complete unit.
Transport on site
If possible, take the controller in its transport
packaging up to the installation location.
Do not remove the protective wrapping until
just before installation.
Storage
For temporary storage please note:
Leave the device in its packaging and do not
expose it to the effects of weather.
Store the product in a dry place and away from
direct sunlight
Temperature -10 to +70 °C, humidity 90% max.
(no condensation)
Packaging
Properly dispose of packaging material.
Transport, storage and packaging
EASYLAB controller Serie TCU3
10
