Trox Technik X-CUBE compact, Transport And Installation Manual

Page: 21 / 144

Required tools

Drill or cordless drill driver

Drill bit holder and bit set

Allen key (size 3, 5, 6, 10)

Slotted screwdriver, size 6

Bits (Torx/Allen, T30))

Open end spanner/ring spanner (head size: 6
and 10)

Water pump pliers

Ratchet straps or suitable lifting gear
4.4.3 Assembling AHU casing units
Personnel:

HVAC technician
Protective equipment:

Industrial safety helmet

Protective clothing

Hearing protection

Safety shoes
NOTICE!
Risk of damage to property from incorrect
assembly!
Be sure to assemble the AHU casing units correctly
as otherwise the condensate drain may be damaged.
– Protect the condensate drain from damage.
Fig. 13: Joining AHU casing units with screws/bolts
①
Hexagon head screws
②
Washers
③
Nuts
④
Module connectors
⑤
Allen screws
⑥
Conical spring washers
Use screws/bolts to join the casing units at the
base frame and at the module connectors.
Additional assembly steps for outdoor units
Personnel:

HVAC technician
Protective equipment:

Safety harness

Industrial safety helmet

Protective clothing

Hearing protection

Safety shoes

Protective gloves
Materials:

Roof

Roof supports (left, centre, right)

4 x cheesehead screws

4 x ring seals

Self-tapping screws
For outdoor installation proceed as follows:
Roof assembly
Fig. 14: Fixing the cental roof support
1. Fix the central roof support (Fig. 14/3) with self-
tapping screws (Fig. 14/2) to the roof (Fig. 14/1).
Setup and assembly
Setting up and assembling the air handling unit > Assembling AHU casing units
Air handling unit X-CUBE compact 21