background image

Important notes

Information on the installation manual

This manual enables operating or service personnel
to correctly install the product described below and
to use it safely and efficiently.

It is essential that these individuals read and fully
understand this manual before starting any work.
The basic prerequisite for safe working is to comply
with the safety notes and all instructions in this
manual.

The local regulations for health and safety at work
and general safety regulations also apply.

Correct use

Type TFM particulate filter module for ceilings is
used as a final filter for the separation of suspended
particles and for air distribution.

The TFM can be used in the supply air and extract
air systems of ventilation and air conditioning sys-
tems. They are suitable for the fitting of Mini Pleat
filter panels for the separation of suspended parti-
cles, to ensure critical air cleanliness and meet
demanding hygiene requirements.

It is important that you comply with any national
hygiene regulations when you install, commission
or use the particulate filter module.

Incorrect use

 WARNING!

Danger due to incorrect use!

Incorrect use of the unit can lead to dangerous
situations.

Never use the unit:

in areas with potentially explosive atmos-
pheres

in humid rooms

in rooms with aggressive or dust-laden air

Limitation of liability

The information in this manual has been compiled
with reference to the applicable standards and
guidelines, the state of the art, and our expertise
and experience of many years.

The manufacturer does not accept any liability for
damages resulting from:

Non-compliance with this manual

Incorrect use

Operation or handling by untrained individuals

Unauthorised modifications

Technical changes

Use of non-approved replacement parts

The actual scope of delivery may differ from the
information in this manual for bespoke construc-
tions, additional order options or as a result of
recent technical changes.

The obligations agreed in the order, the general
terms and conditions, the manufacturer's terms of
delivery, and the legal regulations in effect at the
time the contract is signed shall apply.

We reserve the right to make technical changes.

Defects liability

For details regarding defects liability please refer to
Section VI, Warranty Claims, of the Delivery and
Payment Terms of TROX GmbH.

The Delivery and Payment Terms of TROX GmbH
are available at 

www.troxtechnik.com

.

Qualified staff

HVAC technician

HVAC technicians are individuals who have suffi-
cient professional or technical training in the field
they are working in to enable them to carry out their
assigned duties at the level of responsibility allo-
cated to them and in compliance with the relevant
guidelines, safety regulations and instructions.
HVAC technicians are individuals who have in-
depth knowledge and skills related to HVAC sys-
tems; they are also responsible for the professional
completion of the work under consideration.

Important notes

 

TFM Particulate filter modules for ceilings

2

Summary of Contents for TFM













Reviews: