Assembly of the diffuser face
Connection of the slot diffuser
①
Fig. 6: Assembly of slot diffusers
In the case of a continuous linear arrangement
of slot diffusers, alignment of the diffuser faces
is achieved by inserting the connectors supplied
(Fig. 6/1).
Fix the connectors (2 each per diffuser) into place
on one side, then connect the next diffuser face to
it.
Connection of the corner section CS
Fig. 7: Assembly of the corner section CS
The corner section is fixed into place by others.
The corner section is positioned on the diffuser face
with the enclosed connectors (2 pieces per corner
section). Fix the connectors into place on one side,
and then connect the next diffuser face to it.
Connection of the overflow rail CD and
non-active section BD
Fig. 8: Assembly of the overflow rail CD and
non-active section BD
The overflow rail and non-active section is fixed into
place by others. The included connectors (2 pieces
per diffuser face) are used to position and align
the overflow rail and non-active section. Have the
connectors fixed into place by others on one side,
and then connect the next diffuser face to it.
Assembly
Air terminal devices Slot diffusers PURELINE18
6