background image

Incorrect use

 WARNING!

Danger due to incorrect use!

Incorrect use of the unit can lead to dangerous
situations.

Never use the unit:

in areas with potentially explosive atmos-
pheres

for process air control or shut-off

outdoors without sufficient protection against
the effects of weather

in humid rooms

in rooms with aggressive or dust-laden air

Transport and packaging

Transport

 CAUTION!

Danger of injury from sharp edges, sharp cor-
ners and thin sheet metal parts!

Sharp edges, sharp corners and thin sheet metal
parts may cause cuts or grazes.

Be careful when carrying out any work.

Wear protective gloves, safety shoes and a
hard hat.

Use only lifting and transport gear designed for the
required load. Always secure the load against tip-
ping and falling.

Upon delivery, carefully remove the packaging and
check the unit for transport damage and complete-
ness.

Storage

Please note:

Store the unit only in its original packaging

Protect the unit from the effects of weather

Protect the unit from humidity, dust and con-
tamination

Storage temperature: -10 °C to 50 °C.

Relative humidity: 95 % max., no condensation

Installation

General safety notes

 CAUTION!

Danger of injury from sharp edges, sharp cor-
ners and thin sheet metal parts!

Sharp edges, sharp corners and thin sheet metal
parts may cause cuts or grazes.

Be careful when carrying out any work.

Wear protective gloves, safety shoes and a
hard hat.

 NOTICE!

Contamination or damage will impair the
function of the multileaf damper.

Protect the multileaf damper from contamination
and damage.

Personnel:

HVAC technician

Transport and packaging

 

Multileaf dampers Type JZ-* / WG-JZ-*

3

Summary of Contents for JZ Series

















Reviews: