background image

10

EN

oil-filled radiator TRH 28 E

Maintenance

Activities required before starting maintenance

Warning of electrical voltage

Do not touch the mains plug with wet or damp hands.

Switch the device off.

Hold onto the mains plug while pulling the power cable out
of the mains socket.

Allow the device to cool down completely.

Warning of electrical voltage
Tasks which require the device to be opened must
only be carried out by authorised specialist
companies or by Trotec.

Note

The device is filled with the heating medium oil. Tasks
which require the oil tank to be opened must only be
carried out by Trotec. In case of oil leakage please
contact the customer service.

Cleaning the housing

Warning of electrical voltage

Never immerse the device in water!

Clean the housing with a soft, damp and lint-free cloth. Make
sure that no moisture enters the housing. Protect electrical
components from moisture. Do not use any aggressive cleaning
agents such as cleaning sprays, solvents, alcohol-based or
abrasive cleaners to dampen the cloth.
Wipe the housing dry after cleaning.

Technical annex

Technical data

Parameter

Value

Model

TRH 28 E

Power

level 1:
level 2:
level 3:

1200 W
1300 W
2500 W

Mains connection

220 – 240 V / ~ 50 Hz

Number of heating fins

11

Nominal current consumption 10.9 A

Recommended mains fuse

16 A

Type of protection

IP20

Protection class

I / 

Plug type

VDE plug CEE 7/7

Cable length

1.8 m

Suitable ambient temperature - 20 °C to +40 °C

Dimensions (length x width x
height)

446 x 240 x 635 mm

Minimum distance to walls and
other objects

top (A):

rear (B):

sides (C):

front (D):

100 cm
100 cm
100 cm
100 cm

Weight

10 kg

Information requirements for electrical local space heaters

Summary of Contents for TRH 28 E














Reviews: