EN
5
oil-filled radiator TRH 28 E
Information about the device
Device description
The oil-filled radiator
TRH 28 E
is used to generate warm air for
interior spaces.
The
TRH 28 E
comes with 3 power levels of up to 2,500 W.
The heat electrically generated by the heating elements within
the device is absorbed by the heating medium oil. The heating
medium oil offers the advantages of quick heat-up and long-
term heat storage capacity. On these grounds the heating
medium oil can guarantee a continuous heat emission. The
radiator's 11 fins increase the heat radiating surface and so
enhance its effectiveness.
A target temperature can be set with the thermostat-controlled
automatic operation. Once the target temperature is reached,
the device switches off automatically.
A 24-hour timer function and a digital control panel with LED
display ensure convenient use.
The device is further equipped with an overheating protection
and a tilt protection.
Device depiction
1
2
3
4
No.
Designation
1
Transport handle
2
Control panel
3
Air outlet
4
Foot with castors
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
To make the device easier to transport, it is fitted with wheels.
To make the device easier to transport, it is fitted with a carry
handle.
Before
transporting the device, observe the following:
•
Switch the device off.
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
•
Do not use the power cable to drag the device.
•
Allow the device to cool down sufficiently.
Storage
Before
storing the device, proceed as follows:
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
•
Allow the device to cool down sufficiently.
When the device is not being used, observe the following
storage conditions:
•
Store the device in a dry location and protected from frost
and heat.
•
Store the device in an upright position where it is protected
from dust and direct sunlight.
•
If required, use a cover to protect the device from invasive
dust.
•
Place no further devices or objects on top of the device to
prevent it from being damaged.
