18
EN
electric heater TDS 20 R / TDS 30 R / TDS 50 R
Disposal
The icon with the crossed-out waste bin on waste
electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. You can also find out about other return options
that apply for many EU countries on the website
https://hub.trotec.com/?id=45090. Otherwise, please contact an
official recycling centre for electronic and electrical equipment
authorised for your country.
The separate collection of waste electrical and electronic
equipment aims to enable the re-use, recycling and other forms
of recovery of waste equipment as well as to prevent negative
effects for the environment and human health caused by the
disposal of hazardous substances potentially contained in the
equipment.
Declaration of conformity
The text below sets out the contents of the declaration of
conformity. The signed declaration of conformity can be found
at
https://hub.trotec.com/?id=39781
.
Declaration of conformity
in accordance with the EC Machinery Directive 2006/42/EC,
Annex II, Part 1, Section A
Herewith, we – Trotec GmbH– declare that the machinery
designated below was developed, constructed and produced in
compliance with the requirements of the EC Machinery
Directive in the version 2006/42/EC.
Product model / product:
TDS 20 R
TDS 30 R
TDS 50 R
Product type:
electric heater
Year of manufacture as of:
2021
Relevant EU directives:
•
2011/65/EU: 01/07/ 2011
•
2012/19/EU: 24/07/2012
•
2014/30/EU: 29/03/2014
•
2015/863/EU: 31/03/2015
Applied harmonised standards:
•
EN 55014-1:2017
•
EN 60335-2-30:2009
•
EN 60335-2-30:2009/A11:2012
•
EN 61000-3-2:2014
•
EN 61000-3-3:2013
•
EN 62233:2008
Applied national standards and technical specifications:
•
Regulation (EC) 1907/2006
•
EN 55014-2:2015
•
EN 60335-1:2012/A1:2019
•
EN 60335-1:2012/A2:2019
•
EN 60335-1:2012/A14:2019
Manufacturer and name of the authorised representative of
the technical documentation:
Trotec GmbH
Grebbener Straße 7, D-52525 Heinsberg
Phone: +49 2452 962-400
E-mail: [email protected]
Place and date of issue:
Heinsberg,
14.10.2014
Detlef von der Lieck, Managing Director
