Pre-Installation Instructions
8014 Trotec Speedy 500
Laser Machine Requirements
13/12/2011
Trotec Produktions- und Vertriebs GmbH
_Linzer Strasse 156, A-4600 Wels, Austria, Technical Support
9 / 15
tel_+43 (0)7242 239-7000, fax_+43 (0)7242 239-7380, mailto:
1.7 Electrical Connection
DAMAGES FROM AN INADEQUATE OR INAPPROPRIATE POWER SOURCE ARE NOT COVERED
UNDER WARRANTY.
Noisy or unstable electricity as well as voltage spikes can cause interference and possible damage
to the electronics of the laser system. It is better to connect the laser system to a dedicated
electrical line.
It is highly recommended that you use a surge protection device to protect your equipment.
If electrical power fluctuations, brown outs, or power outages are a problem in your area, an
electrical line stabilizer, UPS (Uninterruptible Power Supply), or backup generator may be required.
If installing any of these devices, make sure that they meet the electrical requirements of the laser
system.
It is your responsibility to provide a suitable electrical supply.
