EN
6
belt sander PBSS 10-600
Information about the device
Device description
The device
PBSS 10-600
is a belt sander for dry sanding.
Possible applications comprise sanding, sharpening, smoothing,
stripping, deburring and derusting of wooden surfaces, plastic,
metal and steel.
The device is fitted with a 600 W motor and with a locking
switch for continuous operation.
For material-compatible working, the belt speed can be
steplessly adjusted within a range of 170 m/min to 250 m/min
by means of the setting wheel.
The device is suitable for both mobile and stationary operation.
For stationary operation use the retaining brackets included in
the scope of delivery. Stationary operation is particularly useful
for the continuous application.
The tool-free clamping system permits a simple abrasive belt
change.
A clean working environment can be accomplished by use of
the dust collector and the adapter for external dust extraction.
Device depiction
1
3
12
11
10
3
2
4
9
5
8
7
6
No.
Designation
1
Setting wheel for belt speed selection
2
Locking switch for on/off switch
3
On/off switch
4
Adapter connection
5
Adapter for external dust extraction
6
Dust collector
7
Abrasive belt
8
Reducer
9
Retaining bracket
10
Adjusting screw for belt run
11
Locking lever for the abrasive belt
12
Fixture for retaining brackets
Scope of delivery
•
1 x Device
PBSS 10-600
•
1 x Adapter for external dust extraction
•
1 x Dust collector
•
1 x Reducer
•
2 x Retaining bracket
•
1 x Abrasive belt for wood, grain size: 80,
dimensions: 75 x 457 mm
•
1 x Manual
