EN
5
air cooler PAE 10
Device depiction
1
2
2
6
5
4
3
9
8
7
5
No.
Designation
1
Control panel
2
Transport handle
3
Air outlet with adjustable ventilation flaps
4
Air flaps for swing function
5
Water tank with filling level indication and water
outlet with rubber stopper (not depicted)
6
Wheels
7
Air inlet with air filter and honeycomb filter
8
Air filter
9
Honeycomb filter
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
To make the device easier to transport, it is fitted with wheels.
To make the device easier to transport, it is fitted with a carry
handle.
Before
transporting the device, observe the following:
•
Switch off the device.
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
•
Do not use the power cable to drag the device.
•
Empty the water tank.
•
Only wheel the device on a level and smooth surface.
After
transporting the device, observe the following:
•
Set up the device in an upright position after transport.
Storage
Before
storing the device, proceed as follows:
•
Empty and clean the water tank prior to storage (see
chapter Maintenance).
•
Allow the honeycomb filter to dry prior to storage.
Otherwise the device may distribute a musty smell after
restart.
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
When the device is not being used, observe the following
storage conditions:
•
dry and protected from frost and heat
•
in an upright position where it is protected from dust and
direct sunlight
•
with a cover to protect it from invasive dust, if necessary
•
Place no further devices or objects on top of the device to
prevent it from being damaged.
