6
EN
oil heater IDS 30 F
Information about the device
Device description
The indirectly fired oil heater serves the purpose of heating the
room air so as to quickly heat large, well-ventilated rooms. The
oil heater runs on fuel oil or diesel, it must not be used with
petrol, heavy fuel oil etc.
It is an oil heater with indirect combustion to be installed in
roofed outdoor areas or in rooms with a sufficient fresh air
supply.
Since it is not equipped with an integrated tank, it is ideally
suited for mobile applications and frequently changing locations.
The device is equipped with an exhaust gas connection for the
discharge of exhaust gases via the flue. It is refuelled externally
using a tank or jerrycan.
The selection option between two operating modes permits both
a manual regulation of the oil heater by the user and an
automatic control aided by an external thermostat.
Functional principle
The device generates warmth by conveying the sucked-in, cold
air past a combustion chamber. Inside the combustion chamber
the fuel is burned. The sucked-in air is heated and fed back to
the environment via the air outlet.
Device depiction
1
2
3
4
5
13
12
11
ON
ON
10
6
7
9
8
4
No.
Designation
1
Rain cap
2
Flue pipe
3
Housing
4
Transport handle
5
Frame
6
Tank line connection
7
Filler neck retainer
8
Control panel
9
Air inlet
10
Connection set for jerrycan (optional)
11
Protective bar
12
Air outlet
13
Flue pipe connection for flue gas evacuation
