8
EN
humidifier B 7 E
Operation
•
Avoid open doors and windows.
•
Make sure that there are no moisture-sensitive objects
located in the immediate vicinity of the mist nozzle, since
water may condense near the mist nozzle.
Operating elements
17
20
21
22
23
24
25
26
19
18
No.
Designation
Meaning
17
Segment display
Indicates the current relative room
humidity.
Indicates the number of hours during
timer
programming
Indicates error codes, see chapter
Errors and faults
18
Low water
level LED
Illuminated if the water level is low
19
Timer
LED
Illuminated when the timer function is
activated
20
Timer
button
Switching the timer function on or off
21
Nebulizer intensity
button
Select nebulizer intensity
22
On/off button
For switching the device on and off
23
Night mode
button
Switching night mode on or off
24
Automatic
operation
button
Switching the automatic mode on or
off
25
Night mode
LED
Illuminated when night mode is
activated.
26
Automatic
operation
LED
Illuminated when automatic mode is
activated
Switching the device on
1. Make sure that the water tank (
3
) has been filled with
drinking water.
2. Make sure that the device is neither damp nor wet on the
outside. Otherwise wipe it dry.
3. Press the On/off switch (
22
).
ð
The segment display (
17
) indicates the last selected
nebulizer intensity.
ð
The device starts to humidify. Fine water mist leaves the
mist nozzle (
2
).
ð
During manual humidification, the device indicates the
current relative humidity on the segment display in
percent.
Setting the nebulizer intensity
Info
If no operational input is made for 40 s, the segment
display (
17
) switches off.
The nebulizer intensity can be set to 3 levels:
•
Stage 1: Low nebulizer intensity
•
Stage 2: Medium nebulizer intensity
•
Stage 3: High nebulizer intensity
ü
The device is switched on.
1. Press the
Nebulizer intensity
button (
21
).
ð
"01" appears on the segment display (
17
) to indicate
the first stage.
2. Repeat the process for stage 2 or 3.
ð
The device now operates with the desired nebulizer
intensity.
Setting the operating mode
You can switch between the following operating modes:
•
Automatic operation
•
Night mode
•
Manual humidification
Manual humidification
The nebulizer intensity can be set to stage 1–3 in this operating
mode at any time (continuous humidification regardless of the
humidity level in the room).
Automatic operation
During automatic operation the device automatically regulates
the nebulizer intensity.
ü
The device is switched on.
1. Press the
automatic operation
button (
24
) to activate
automatic operation.
ð
The
automatic operation
LED (
26
) appears on the
display.
ð
Automatic operation is now set.
