6
EN
Ozone generator Airozon 60000
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
To make the device easier to transport, it is fitted with a carry
handle.
Before
transporting the device, observe the following:
•
Switch the device off.
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
•
If the device was previously in use, wait until the end of
the calculated regeneration period (see Shutdown chapter)
before transporting the device.
•
Do not use the power cable to drag the device.
After
transporting the device, observe the following:
•
Set up the device in an upright position after transport.
10
Storage
When the device is not being used, observe the following
storage conditions:
•
Dry and protected from frost and heat
•
With a cover to protect it from invasive dust, if necessary
Assembly and start-up
Scope of delivery
•
1 x Manual
•
1 x Device
•
1 x Power cable
Unpacking the device
1. Open the cardboard box and take the device out.
2. Completely remove the packaging.
3. Fully unwind the power cable. Make sure that the power
cable is not damaged and that you do not damage it during
unwinding.
Start-up
When positioning the device, observe the minimum distance
from walls or other objects as described in the Technical data
chapter.
A
B
C
C
D
•
Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
•
Only put up the device in an upright, stable position on firm
ground.
•
Make sure the device is only placed on firm, dry and
vibration-free ground.
•
Position the device as close as possible to the centre of the
room to ensure an optimum air circulation.
•
When positioning the device, keep a sufficient distance to
heat sources.
