Follow diagram below and make sure that all exposed wires are secured inside wire nuts or terminal block.
Note : Wires from house may vary in color and may not include ground wire ( green ).
From House
White
Black
From Fan
White
Black
(AC-N)
(AC-L)
(MOTOR-N)
(MOTOR-L)
Green
Green
Green
( from downrod )
( from mounting bracket )
( for ground wire )
*White wire from house to white wire from fan
*Black wire from house to black wire and blue wire from fan
*Ground wire from house to green wire from downrod and from mounting bracket
*Secure with twist - lock wire nuts. (Included)
*
After wiring is completed, gently push wires into junction box with wire nuts pointing upward.
Making electrical wire connection
Wire Form House
Blue
(For Light Kit)
Secure with twist - lock wire nuts.
3. CANOPY INSTALLATION
Outlet Box
Note:
Four screws are pre-screwed on mounting bracket for canopy installation.
Left-hand
side screw
(Removing)
Remove left-hand side screw on mounting bracket first and loosen the other one.
(
Please do the same for the other two screws on the across side of mounting bracket.)
Rotate the canopy slightly until both two loosening screws are in the holes of L type slots.
Tighten 4 screws firmly.
Note:
1
2
3
Screw
(Loosening)
1
3
Screw (4)
(
)
Tightening
2. WIRE CONNECTION
P5
L Type Slots
2
1F. Hanging the fan
(For Flush mount)
Mounting
Bracket
Tab
Fan assembly
Lift the fan assembly and hang onto the tab on mounting bracket.
This will permit you to make the wire connections without having to hold the fan up as well.
Note:
