Receiver
Mounting
Bracket
4. CANOPY INSTALLATION
5. BLADE INSTALLATION
Blade
Screws &
Washers
(3)
Blade
Arm
Slot
Blade
5. Installing the blades
Slide blade into a slot in motor above a blade arm.
Secure blade to blade arm using three
blade screws and washers.
Repeat for remaining blades
and retighten all screws.
Canopy
Screw
Key
Hole
Push up canopy until the screw still in the mounting bracket
is engaged with the large end of the keyhole on canopy.
Rotate canopy slightly until the screw head is engaged
in the narrow end of the key hole.
Insert the remaining canopy screw into the other hole,
and tighten both canopy screws.
4. Installing the canopy
Note: Two screws are pre-installed on mounting bracket for
canopy installation. You will need to remove one and loosen
the other slightly.
Note: Do not squeeze all the wires while
inserting the receiver into the mounting bracket.
3A. Insert receiver into mounting bracket
Follow separate instructions enclosed with the remote control.
3B. Making electrical wire connections
3. WIRING CONNECTION
6. REMOTE SETTING
INSTALLATION IS COMPLETE
Follow the separate instructions enclosed with the remote control.
This fan model has an optional integrated dimmable LED array;
Use the "D" dimming setting for the Light Function Select Switch.
6. Setting the Remote Control
